Sanford 14400 BTU Portable, Energy Saving, Smart, Air Conditioner (4 in 1 Air Conditioner | Heater | Cooler | Dehumidifier) - SF2850PAC

·             4 in 1 Air Conditioner | Heater | Cooler | Dehumidifier.

·             3 Speed fan control, Auto swing, Strong airflow.

·             Dual Side LED Temperature Display.

·             Temperature range from 16°C to 32°C.

·             Water-full Indicator.

·             Eco-friendly R290 Refrigerant.

·             Improve cooling efficiency and save energy.

·             Castor wheels & side handle for easy mobility.

·             Easy control of touch panel and comes with remote controller

·             Power: 1335 watts.

·             Wi-Fi Operated with Smart App

·             Trusted One Year Browns Warranty

·             Download App from below QR. IOS may have subscription fee

INSTALLATION

1.1 UNPACKING

• Unpack the carton and take the appliance and accessories out.
• Check the device after unpacking for any damage or scratches on it.

Accessories:

1. Exhaust hose
2. Hose connector
3. Window kit adapter
4. Remote control
5. Window kit
6. Drainage pipe

1.2 CHOOSE YOUR LOCATION

• If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
• Place the unit on a firm, level surface in an area with at least 50cm of free space around it to allow for proper air circulation.
• Do not operate in close proximity to walls, curtains, or other objects that may block air inlet and outlet. Keep the air inlet and outlet free of obstacles.
• Never install the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other products that generate heat.
• Direct sunlight
• Mechanical vibration or shock
• Excessive dust
• Lack of ventilation, such as cabinet or bookcase
• Uneven surface

⚠️ WARNING! Install the unit in rooms which exceed 12 m². Do not install the unit in a place where inflammable gas may leak.

ℹ️ NOTE! The manufacturer may provide other suitable example or may provide additional information about the refrigerant odour.

1.3 ATTACH THE EXHAUST HOSE

The air conditioner needs to be ventilated to the outside in order to expel the air containing waste heat and moisture from the electrical appliances out of the room.

Do not replace or extend the exhaust hose which will result in reduced efficiency and even shutdown of the unit due to low back pressure.

Steps:

1. Connect the hose connector to one end of the exhaust hose.
2. Connect the windows kit adapter to the other end of the exhaust hose.
3. Extend the adjustable window kit to the length of the window. Connect the exhaust hose to the window kit.
4. Close the window to secure the kit in place. It needs to hold the windows kit firmly in place, and if necessary, secure the window kit with duct tape. It is recommended to seal the gap between the adapter and the side of the window for maximum efficiency.
5. Attach the hose connector to the exhaust air outlet of the unit.
6. Adjusting the length of the flexible exhaust hose, and avoid bends in the hose. Then place AC near an electrical outlet.

Step 7: Adjust the louver at the air outlet, and then switch on the unit